Show simple item record

dc.contributor.authorÖzdemir, Rifat Gürcan
dc.contributor.authorAktin, Ayşe Tülin
dc.date.accessioned2016-04-28T08:48:44Z
dc.date.available2016-04-28T08:48:44Z
dc.date.issued2009-07-16
dc.identifier.issn0377-2217
dc.identifier.urihttp://hdl.handle.net/11413/1247
dc.description.abstractThis paper presents a two-stage approach for pattern generation and cutting plan determination of the one-dimensional cutting stock problem. Calculation of the total number of patterns that will be cut and generation of the cutting patterns are performed in the first stage. On the other hand, the second stage determines the cutting plan. The proposed approach makes use of two separate integer linear programming models. One of these models is employed by the first stage to generate the cutting patterns through a heuristic procedure with the objective of minimizing trim loss. The cutting patterns obtained from Stage I are then fed into the second stage. In this stage, another integer linear programming model is solved to form a cutting plan. The objective of this model is to minimize a generalized total cost function consisting of material inputs, number of setups, labor hours and overdue time: subject to demand requirements, material availability, regular and overtime availability, and due date constraints. The study also demonstrates an implementation of the proposed approach in a coronary stent manufacturer. The case study focuses on the cutting phase of the manufacturing process followed by manual cleaning and quality control activities. The experiments show that the proposed approach is suitable to the conditions and requirements of the company. (C) 2008 Elsevier B.V. All rights reserved.tr_TR
dc.language.isoen_UStr_TR
dc.publisherElsevier Science Bv, Po Box 211, 1000 Ae Amsterdam, Netherlandstr_TR
dc.relationEuropean Journal Of Operational Researchtr_TR
dc.subjectOR in health servicestr_TR
dc.subjectproductiontr_TR
dc.subjectOne-dimensional cutting stock problemtr_TR
dc.subjectalgorithmtr_TR
dc.subjectlengthstr_TR
dc.subjectnumbertr_TR
dc.subjectüretimtr_TR
dc.subjecttek boyutlu kesme stok sorunutr_TR
dc.subjectalgoritmatr_TR
dc.subjectuzunluklarıtr_TR
dc.subjectsayıtr_TR
dc.titleAn integrated approach to the one-dimensional cutting stock problem in coronary stent manufacturingtr_TR
dc.typeArticletr_TR
dc.contributor.authorIDTR109203tr_TR
dc.contributor.authorIDTR141173tr_TR
dc.identifier.wos263206800035
dc.identifier.scopus2-s2.0-58149215955


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record